Best Efficient Mining Settings for RX 6800 with different Algorithms Ethash, KawPow and Flux much more…

AMD Graphics Card Mining settings for high Profitibility

This Mining settings for RX 6800 will work for all versions of RX 6800 across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RX 6800 or get Worst performance depending on your Silicon Lottery. So your RX 6800 may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RX 6800 profitable for mining?

Mining profitability is mainly determined with how much power you are using and what most hash rate you are getting. So, If your GPU is consuming Least power and giving higher Hash rate than it is an Efficient GPU.

Now you have to check the coin price. If your RX 6800 GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RX 6800 these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RX 6800 GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RX 6800 and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

Here the only RTX 3000 GPU that is not affected with this LHR is RTX 3090. The RTX 3090 is the only gpu that is not affected by the LHR programming. You can buy an RTX 3090 without thinking twice.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RX 6800 with different Algorithms Ethash, KawPow and Flux much more.

Overclock Settings:

RX 6800 Ethash Settings:

GPU Name	test1
ALGO	Ethash
Hash Rate	61Mh/s
Core Voltage	850
Power Limit	~80% or 250 (W)
Temp Limit	63
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	125W
Fan Speed	30%

RX 6800 Kowpow Settings:

GPU Name	test1
ALGO	Kowpow
Hash Rate	30Mh/s
Core Voltage	850
Power Limit	~80% or 250 (W)
Temp Limit	64
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	200W
Fan Speed	50%

RX 6800 Firopow Settings:

GPU Name	test1
ALGO	Firopow
Hash Rate	30Mh/s
Core Voltage	850
Power Limit	~80% or 250 (W)
Temp Limit	67
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	200W
Fan Speed	50%

This are the great Efficient Mining Settings for RX 6800 with different Algorithms Ethash, KawPow and Flux much more

January 19, 2022January 21, 2022

Best Efficient Mining Settings for RX 6800 xt with different Algorithms Ethash, KawPow and Flux much more…

This Mining settings for RX 6800 xt will work for all versions of RX 6800 xt across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RX 6800 xt or get Worst performance depending on your Silicon Lottery. So your RX 6800 xt may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RX 6800 xt profitable for mining?

Now you have to check the coin price. If your RX 6800 xt GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RX 6800 xt these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RX 6800 xt GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RX 6800 xt and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RX 6800 xt with different Algorithms Ethash, KawPow and Flux much more.

Overclock Settings:

RX 6800 xt Ethash Settings:

GPU Name	test1
ALGO	Ethash
Hash Rate	61Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	63
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	130W
Fan Speed	30%

RX 6800 xt Kowpow Settings:

GPU Name	test1
ALGO	Kowpow
Hash Rate	30Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	64
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	200W
Fan Speed	50%

RX 6800 xt Firopow Settings:

GPU Name	test1
ALGO	Firopow
Hash Rate	30Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	67
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	200W
Fan Speed	50%

This are the great Efficient Mining Settings for RX 6800 xt with different Algorithms Ethash, KawPow and Flux much more

January 19, 2022January 21, 2022

Best Efficient Mining Settings for RX 6900 with different Algorithms Ethash, KawPow and Flux much more…

This Mining settings for RX 6900 will work for all versions of RX 6900 across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RX 6900 or get Worst performance depending on your Silicon Lottery. So your RX 6900 may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RX 6900 profitable for mining?

Now you have to check the coin price. If your RX 6900 GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RX 6900 these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RX 6900 GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RX 6900 and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RX 6900 with different Algorithms Ethash, KawPow and Flux much more.

Overclock Settings:

RX 6900 Ethash Settings:

GPU Name	RX 6900
ALGO	Ethash
Hash Rate	64Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	63
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	150W
Fan Speed	30%

RX 6900 Kowpow Settings:

GPU Name	RX 6900
ALGO	Kowpow
Hash Rate	31Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	64
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	150W
Fan Speed	50%

RX 6900 Firopow Settings:

GPU Name	RX 6900
ALGO	firopow
Hash Rate	31Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	67
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	150W
Fan Speed	50%

This are the great Efficient Mining Settings for RX 6900 with different Algorithms Ethash, KawPow and Flux much more

January 19, 2022January 21, 2022

Best Efficient Mining Settings for RX 6900 XT with different Algorithms Ethash, KawPow and Flux much more…

This Mining settings for RX 6900 XT will work for all versions of RX 6900 XT across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RX 6900 XT or get Worst performance depending on your Silicon Lottery. So your RX 6900 XT may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RX 6900 XT profitable for mining?

Now you have to check the coin price. If your RX 6900 XT GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RX 6900 XT these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RX 6900 XT GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RX 6900 XT and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RX 6900 XT with different Algorithms Ethash, KawPow and Flux much more.

Overclock Settings:

test1 EThash Settings:

GPU Name	RX 6900 XT
ALGO	Ethash
Hash Rate	66Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	63
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	150W
Fan Speed	30%

test1 Kowpow Settings:

GPU Name	RX 6900 XT
ALGO	Kowpow
Hash Rate	32Mh/s
Core Voltage	850
Power Limit	NA
Temp Limit	64
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	220W
Fan Speed	50%

test1 Firopow Settings:

GPU Name	RX 6900 XT
ALGO	Firopow
Hash Rate	32Mh/s
Core Voltage	N/A
Power Limit	~80% or 250 (W)
Temp Limit	67
Core Clock	1350
Memory Clock	2100 for Windows, 1050 for Linux
MCV VDDCI	NA
Power Taken	220W
Fan Speed	50%

This are the great Efficient Mining Settings for RX 6900 XT with different Algorithms Ethash, KawPow and Flux much more

January 14, 2022January 14, 2022

Best Efficient Mining Settings for RTX 3070 TI with different Algorithms Ethash, KawPow and Flux much more…

NVIDIA Graphics Card Mining settings for high Profitibility

This Mining settings for RTX 3070 TI will work for all versions of RTX 3070 TI across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RTX 3070 TI or get Worst performance depending on your Silicon Lottery. So your RTX 3070 TI may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RTX 3070 TI profitable for mining?

Now you have to check the coin price. If your RTX 3070 TI GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RTX 3070 TI these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RTX 3070 TI GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RTX 3070 TI and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RTX 3070 TI with different Algorithms Ethash, KawPow and Flux much more.

Overclock Settings:

RTX 3070 TI Kowpow Settings:

GPU Name	RTX 3070 TI
ALGO	Kowpow
Hash Rate	92MH/s
Core Voltage	N/A
Power Limit	~80% or 250 (W)
Temp Limit	73
Core Clock	100
Memory Clock	1000 for Windows, 2000 for Linux
Power Taken	250W
Fan Speed	70%

RTX 3070 TI MTP Settings:

GPU Name	RTX 3070 TI
ALGO	MTP
Hash Rate	3.83MH/s
Core Voltage	N/A
Power Limit	~60% or 190 (W)
Temp Limit	74
Core Clock	100
Memory Clock	1000 for Windows, 2000 for Linux
Power Taken	185W
Fan Speed	70%

RTX 3070 TI EThash Settings:

GPU Name	RTX 3070 TI
ALGO	ETHash
Hash Rate	92MH/s
Core Voltage	N/A
Power Limit	~50% or 150 (W)
Temp Limit	75
Core Clock	-200
Memory Clock	1800 for Windows, 3600 for Linux
Power Taken	150W
Fan Speed	70%

RTX 3070 TI Ethash – LHR Settings:

GPU Name	RTX 3070 TI
ALGO	Ethash – LHR
Hash Rate	46MH/s
Core Voltage	N/A
Power Limit	~50% or 150 (W)
Temp Limit	75
Core Clock	-200
Memory Clock	1800 for Windows, 3600 for Linux
Power Taken	150W
Fan Speed	70%

RTX 3070 TI Autolykos Settings:

GPU Name	RTX 3070 TI
ALGO	Autolykos
Hash Rate	171MH/s
Core Voltage	N/A
Power Limit	~60% or 190 (W)
Temp Limit	72
Core Clock	100
Memory Clock	1000 for Windows, 2000 for Linux
Power Taken	185W
Fan Speed	70%

This are the great Efficient Mining Settings for RTX 3070 TI with different Algorithms Ethash, KawPow and Flux much more

January 14, 2022January 14, 2022

Best Efficient Mining Settings for RTX 3070 with different Algorithms Ethash, KawPow and Flux much more…

This Mining settings for RTX 3070 will work for all versions of RTX 3070 across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RTX 3070 or get Worst performance depending on your Silicon Lottery. So your RTX 3070 may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RTX 3070 profitable for mining?

Now you have to check the coin price. If your RTX 3070 GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RTX 3070 these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RTX 3070 GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RTX 3070 and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RTX 3070 with different Algorithms Ethash, KawPow and Flux much more.

Overclock Settings:

RTX 3070 EThash Settings:

GPU Name	RTX 3070
ALGO	ETHash
Hash Rate	62MH/s
Core Voltage	N/A
Power Limit	55% or 130w
Temp Limit	76
Core Clock	-200
Memory Clock	1300 for Windows, 2600 for Linux
Power Taken	145W
Fan Speed	70%

RTX 3070 Octopus Settings:

GPU Name	RTX 3070
ALGO	Octopus
Hash Rate	58MH/s
Core Voltage	N/A
Power Limit	60% or 150w
Temp Limit	75
Core Clock	100
Memory Clock	1000 for Windows, 2000 for Linux
Power Taken	145W
Fan Speed	70%

RTX 3070 Kowpow Settings:

GPU Name	RTX 3070
ALGO	Kowpow
Hash Rate	30MH/s
Core Voltage	N/A
Power Limit	60% or 150w
Temp Limit	74
Core Clock	100
Memory Clock	1000 for Windows, 2000 for Linux
Power Taken	145W
Fan Speed	70%

This are the great Efficient Mining Settings for RTX 3070 with different Algorithms Ethash, KawPow and Flux much more

December 10, 2021December 10, 2021

Raptoreum Mining Settings for Ryzen 9 5900HX MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

Processor	Ryzen 9 5900HX 8 Core Processor
CPU Core Clock	Auto
CPU Ratio Mode	All cores/ Per CCX (You can choose any)
CPU Core Ratio	36.00 3.60Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)	Disabled (Doesn’t Matter you can enable it)
CPU Vcore	1.0015v (Default Auto)
Hashrate	0.95H/s [958H/s Avg.]
5900HX Power Consumption	39W at wall
Cooler	A.M.D. Ryzen Wraith Prism Cooler
CPU Temperature	76°C
Profit	$0.35 /day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 9 5900HX MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 5900HX System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

Click on the CCX values you want to change
Now type your values with the keyboard.
Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 5900HX System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 5900HX System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

December 10, 2021December 10, 2021

Raptoreum Mining Settings for Ryzen 7 5800H MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

Processor	Ryzen 7 5800H 8 Core Processor
CPU Core Clock	Auto
CPU Ratio Mode	All cores/ Per CCX (You can choose any)
CPU Core Ratio	36.00 3.60Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)	Disabled (Doesn’t Matter you can enable it)
CPU Vcore	1.0055v (Default Auto)
Hashrate	1.13KH/s [1136H/s Avg.]
5800H Power Consumption	43W at wall
Cooler	A.M.D. Ryzen Wraith Prism Cooler
CPU Temperature	71°C
Profit	$0.45/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 7 5800H MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 5800H System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

Click on the CCX values you want to change
Now type your values with the keyboard.
Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 5800H System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 5800H System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

December 10, 2021December 10, 2021

Raptoreum Mining Settings for Ryzen 7 5700G MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

Processor	Ryzen 7 5700G 8 Core Processor
CPU Core Clock	Auto
CPU Ratio Mode	All cores/ Per CCX (You can choose any)
CPU Core Ratio	36.00 3.60Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)	Disabled (Doesn’t Matter you can enable it)
CPU Vcore	1.0065v (Default Auto)
Hashrate	1.03KH/s [1034H/s Avg.]
5700G Power Consumption	60W at wall
Cooler	A.M.D. Ryzen Wraith Prism Cooler
CPU Temperature	75°C
Profit	$0.40/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 7 5700G MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 5700G System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

Click on the CCX values you want to change
Now type your values with the keyboard.
Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 5700G System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 5700G System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

December 10, 2021December 10, 2021

Raptoreum Mining Settings for Ryzen 9 4900HS MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

Processor	Ryzen 9 4900HS 8 Core Processor
CPU Core Clock	Auto
CPU Ratio Mode	All cores/ Per CCX (You can choose any)
CPU Core Ratio	36.00 3.60Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)	Disabled (Doesn’t Matter you can enable it)
CPU Vcore	1.0605v (Default Auto)
Hashrate	0.57KH/s [578H/s Avg.]
4900HS Power Consumption	32W at wall
Cooler	A.M.D. Ryzen Wraith Prism Cooler
CPU Temperature	77°C
Profit	$0.20/day if $0.10/1kWh