Best Efficient Mining Settings for RTX 3070 TI with different Algorithms Ethash, KawPow and Flux much more…

NVIDIA Graphics Card Mining settings for high Profitibility

This Mining settings for RTX 3070 TI will work for all versions of RTX 3070 TI across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RTX 3070 TI or get Worst performance depending on your Silicon Lottery. So your RTX 3070 TI may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RTX 3070 TI profitable for mining?

Mining profitability is mainly determined with how much power you are using and what most hash rate you are getting. So, If your GPU is consuming Least power and giving higher Hash rate than it is an Efficient GPU.

Now you have to check the coin price. If your RTX 3070 TI GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RTX 3070 TI these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RTX 3070 TI GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RTX 3070 TI and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

Here the only RTX 3000 GPU that is not affected with this LHR is RTX 3090. The RTX 3090 is the only gpu that is not affected by the LHR programming. You can buy an RTX 3090 without thinking twice.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RTX 3070 TI with different Algorithms Ethash, KawPow and Flux much more. 

Overclock Settings:

RTX 3070 TI Kowpow Settings:

GPU NameRTX 3070 TI
ALGOKowpow
Hash Rate92MH/s
Core VoltageN/A
Power Limit~80% or 250 (W)
Temp Limit73
Core Clock100
Memory Clock1000 for Windows, 2000 for Linux
Power Taken250W
Fan Speed70%

RTX 3070 TI MTP Settings:

GPU NameRTX 3070 TI
ALGOMTP
Hash Rate3.83MH/s
Core VoltageN/A
Power Limit~60% or 190 (W)
Temp Limit74
Core Clock100
Memory Clock1000 for Windows, 2000 for Linux
Power Taken185W
Fan Speed70%

RTX 3070 TI EThash Settings:

GPU NameRTX 3070 TI
ALGOETHash
Hash Rate92MH/s
Core VoltageN/A
Power Limit~50% or 150 (W)
Temp Limit75
Core Clock-200
Memory Clock1800 for Windows, 3600 for Linux
Power Taken150W
Fan Speed70%

RTX 3070 TI Ethash – LHR Settings:

GPU NameRTX 3070 TI
ALGOEthash – LHR
Hash Rate46MH/s
Core VoltageN/A
Power Limit~50% or 150 (W)
Temp Limit75
Core Clock-200
Memory Clock1800 for Windows, 3600 for Linux
Power Taken150W
Fan Speed70%

RTX 3070 TI Autolykos Settings:

GPU NameRTX 3070 TI
ALGOAutolykos
Hash Rate171MH/s
Core VoltageN/A
Power Limit~60% or 190 (W)
Temp Limit72
Core Clock100
Memory Clock1000 for Windows, 2000 for Linux
Power Taken185W
Fan Speed70%

This are the great Efficient Mining Settings for RTX 3070 TI with different Algorithms Ethash, KawPow and Flux much more

Best Efficient Mining Settings for RTX 3070 with different Algorithms Ethash, KawPow and Flux much more…

NVIDIA Graphics Card Mining settings for high Profitibility

This Mining settings for RTX 3070 will work for all versions of RTX 3070 across other board partners like Gigabyte, Asus, Zotac, EVGA, MSI and other board partners. The main difference is that all the GPUs are made up of Silicon. You can get better hash rates with your RTX 3070 or get Worst performance depending on your Silicon Lottery. So your RTX 3070 may perform great depending if you are lucky enough or not. Else we all know better luck next time. 🙂

Is RTX 3070 profitable for mining?

Mining profitability is mainly determined with how much power you are using and what most hash rate you are getting. So, If your GPU is consuming Least power and giving higher Hash rate than it is an Efficient GPU.

Now you have to check the coin price. If your RTX 3070 GPU is Efficient and the Coin is profitable (i.e. Ethereum) then it is a win win situation and congratulations you are going to make money with GPU. Now for RTX 3070 these values we got are from Online Sources. We all know Crypto is a volatile Asset. So, it may be too profitable now, but it may not be that much profitable tomorrow. So, please Buy, Mine at your own risk.

Here I am Providing the Most Efficient Mining Settings for RTX 3070 GPU.

What is LHR Hash Rate? Does it have an effect?

The LHR is some kind of coding done by Nvidia which is integrated in the GPU chip of some RTX 3070 and many other RTX GPUs for limiting GPU Hash rate about 50%. At the launch of RTX 3000 cards Mining was on the moon. So, all miners were buying Nvidia cards and no gamers can’t able to get the cards. So, Nvidia came up with a solution to limit their cards for mining. Their all new series of RTX 3000 cards comes with this encryption where hash rates will be cut to half. Suppose if you are getting 64MH in non LHR GPUs, the hash rates on the LHR GPUs will be about 32MH.

But the +ve thing is that mining software makers came with some solution and now they have unlocked the hash rates upto 75% and about 100% if you use some selected mining softwares by dual mining.

Here the only RTX 3000 GPU that is not affected with this LHR is RTX 3090. The RTX 3090 is the only gpu that is not affected by the LHR programming. You can buy an RTX 3090 without thinking twice.

This LHR (Lite Hash Rate) is affected with NVIDIA cards. You can buy AMD Cards. you can get a good hash rate with AMD Cards but the problem is that they are not that much power efficient than NVIDIA. So, people mainly prefer NVidia Cards. Here are the great Efficient Mining Settings for RTX 3070 with different Algorithms Ethash, KawPow and Flux much more. 

Overclock Settings:

RTX 3070 EThash Settings:

GPU NameRTX 3070
ALGOETHash
Hash Rate62MH/s
Core VoltageN/A
Power Limit55% or 130w
Temp Limit76
Core Clock-200
Memory Clock1300 for Windows, 2600 for Linux
Power Taken145W
Fan Speed70%

RTX 3070 Octopus Settings:

GPU NameRTX 3070
ALGOOctopus
Hash Rate58MH/s
Core VoltageN/A
Power Limit60% or 150w
Temp Limit75
Core Clock100
Memory Clock1000 for Windows, 2000 for Linux
Power Taken145W
Fan Speed70%

RTX 3070 Kowpow Settings:

GPU NameRTX 3070
ALGOKowpow
Hash Rate30MH/s
Core VoltageN/A
Power Limit60% or 150w
Temp Limit74
Core Clock100
Memory Clock1000 for Windows, 2000 for Linux
Power Taken145W
Fan Speed70%

This are the great Efficient Mining Settings for RTX 3070 with different Algorithms Ethash, KawPow and Flux much more

Raptoreum Mining Settings for Ryzen 5 1400 MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 5 1400 4 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio34.00 3.40Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0000v (Default Auto)
Hashrate0.40KH/s [419H/s Avg.]
1400 Power Consumption53W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature81°C
Profit$0.16/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 5 1400 MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 1400 System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 1400 System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 1400 System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 5 1600 MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 5 1600 6 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio35.00 3.50Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0000v (Default Auto)
Hashrate0.820KH/s [876H/s Avg.]
1600 Power Consumption53W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature81°C
Profit$0.35/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 5 1600 MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 1600 System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 1600 System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 1600 System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 7 1700X MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 7 1700X 8 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio35.00 3.50Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0000v (Default Auto)
Hashrate0.90KH/s [896H/s Avg.]
1700X Power Consumption73W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature71°C
Profit$1/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 7 1700X MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 1700X System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 1700X System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 1700X System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 5 2600 MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 5 2600 6 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio35.00 3.50Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0125v (Default Auto)
Hashrate1.06KH/s [1062H/s Avg.]
2600 Power Consumption54W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature88°C
Profit$0.50/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 5 2600 MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 2600 System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 2600 System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 2600 System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 7 2700U MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 7 2700U 4 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio35.00 3.50Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0215v (Default Auto)
Hashrate0.33KH/s [335H/s Avg.]
2700U Power Consumption35W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature79°C
Profit$0.15/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 7 2700U MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 2700U System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 2700U System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 2700U System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 7 2700X MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 7 2700X 8 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio35.00 3.50Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0060v (Default Auto)
Hashrate1.19KH/s [1192H/s Avg.]
2700X Power Consumption82W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature84°C
Profit$0.55/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 7 2700X MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 2700X System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 2700X System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 2700X System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 5 3100 MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 5 3100 4 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio36.00 3.60Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0215v (Default Auto)
Hashrate1.01KH/s [1014H/s Avg.]
3100 Power Consumption59W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature78°C
Profit$0.47/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 5 3100 MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 3100 System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 3100 System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 3100 System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.

Raptoreum Mining Settings for Ryzen 5 3500X MAX Hash Rate with Max Efficiency

This are the settings you should do in your bios for Raptoreum (RTM) Mining:

Today in this article I will provide you with the best Raptoreum (RTM) Mining Settings for Max Efficiency and Hash Rate.

ProcessorRyzen 5 3500X 6 Core Processor
CPU Core ClockAuto
CPU Ratio ModeAll cores/ Per CCX (You can choose any)
CPU Core Ratio36.00 3.60Ghz (Default 34.00 3.40Ghz)
Extreme Memory Profile (X.M.P.)Disabled (Doesn’t Matter you can enable it)
CPU Vcore1.0085v (Default Auto)
Hashrate1.04KH/s [1046H/s Avg.]
3500x Power Consumption63W at wall
CoolerA.M.D. Ryzen Wraith Prism Cooler
CPU Temperature75°C
Profit$0.45/day if $0.10/1kWh

Raptoreum (RTM) Mining Settings for Ryzen 5 3500X MAX Hash Rate with Max Efficiency

Asus Motherboard Bios Settings for Raptoreum [RTM] Mining on 3500x System:

Go to Ai Tweaker > CPU Core Ratio (Per CCX)

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

How to change the CCX Values while Overclocking?

  • Click on the CCX values you want to change
  • Now type your values with the keyboard.
  • Asus Motherboards doesn’t allow to select CCX values from dropdown.

In same way, change the Vcore / VDDCR CPU Voltage to 1.00000V

Gigabyte/ Aorus Motherboard Bios Settings for Raptoreum [RTM] Mining on 3500x System:

Change All Cores to 36.00 it sets the CPU Frequency at 3.60Ghz

In same way, change the CPU Vcore to 1.00000V

MSI Motherboard Bios Settings for Raptoreum [RTM] Mining on 3500x System:

Change CCX0, CCX1 to 36.00 it sets the CPU Frequency at 3.60Ghz

In the same way, change the CPU Core Voltage to 1.000V

By doing some minor tweaking, You can use these settings on your 3000 series processors as well.